General Info
Features & Benefits
Specifications
Applications
Photos/Video

RF Matrix Routers : SRM Series

Downloads Open/Close

Spec Sheet
SRM 2150 L-Band Matrix
SRM 1000 Broadband Matrix
SRM 0200 IF Matrix
Control Protocol

The SRM Series RF matrix routers allow any of 16 to 128 inputs carrying RF signals to be routed to any of 16 to 128 outputs. The systems utilize patented stack-and-tier technology which offer ultra-reliability and high-performance in a compact, modular design. this greatly reduces the size and complexity of the systems while greatly enhancing reliability by eliminating the need for patch panels and repetitive mechanical connections. The systems are controllable either locally via the front panel keypad or remotely via computer and are compatible with monitoring and control systems.

rf matrix router

Features & Benefits

Operating frequency ranges for Broadband IF (5-1000 MHz), Intermediate Frequency (5-200 MHz) & Satellite L-band (950-2150 MHz
Modular designs allows for easy system installation and expansion
Controllable locally via front panel keypad or remotely via computer and are compatible with most monitoring and control systems, freeing up staff to attend to more critical tasks
Permit immediate routing of alternate signal sources
Solid-state switches provide seamless (nanoseconds) switching speeds
Maximize use of existing equipment with automated switching and scheduling; no need for duplicate equipment
The rear panel design facilitates structured cable routing, eliminating confusing tangles of cable

	SRM 0200 IF Matrix	SRM 1000 Broadband Matrix	SRM 2150 L-Band Matrix
Operating Frequency:	5-200 MHz	5-1000 MHz	950-2150 MHz
Insertion Loss:	0 ± 1.5 dB	0 ± 2 dB	0 ± 2 dB
Impedance:	75 Ω (50 Ω optional)	75 Ω (50 Ω optional)	75 Ω (50 Ω optional)
P1dB	+5 dBm	+6 dBm	-7 dBm
Frequency Response	± 1 dB	± 3 dB	± 3 dB
Isolation
(input to input)	60 dB	45 dB	45 dB
(output to output)	60 dB	50 dB	45 dB
(input to output)	65 dB	50 dB	40 dB
Return Loss	14 dB	> 10 dB	> 10 dB
Control Response time	1.26 msec.	1.26 msec.	1.26 msec.
Switching Speeds	40 nsec.	40 nsec.	40 nsec.
Noise figures	14 dB	13 dB	15 dB
RF Connectors	Type “F”, 75 Ω (BNC 50 or 75 Ω , SMA or N connectors optional)
Power Required	100-240 VAC, 50/60 Hz. Dual AC inputs and dual internal PSUs for redundancy.
Local Control	Front panel keypad with LCD display.
PC Remote Control	RS-232, RS-422/485, IEEE 488 (GPIB), or TCP/IP 10 BaseT via customer-supplied PC, SNMP, TELNET
Software	Basic PC compatible operating software and system protocol included with system.
INter-module Control Data	Synchronous Serial
Mechanical:	3 RU (5.25” High x 19” Wide x 20” Deep) (Dimensions of SRD, SRM & SRO Modules*) Systems over 64x64 require 5 RU SRD and SRO modules. Call for more details.
Notes	In systems between 64x64 and 240x256 Outputs, SRD and SRO modules are 5 RU (8.75” High x 19” Wide x 20” Deep).
Options	Up to 10 additional UCM 064 remote control panels • summary alarm for power failure via contact closure