Wideband RF Relay Switch with DC Control

Home > Products > RF Relay Switches > SRF 1000

SRF 1000

(Opens new window)

Customer Comments:

"Sales/Customer Service are First Class! Quotes and technical questions were answered very quickly, customer support was handled by knowledgeable people and warranty issues were taken care of with no questions asked. I wish all vendors were this helpful."

Steven Uchiumi
PREDIWAVE

More Testimonials

The SRF 1000 is a bi-directional, wideband RF switch that offers a high performance, cost effective solution to the growing need for switching in an environment of rapidly expanding channel capacity and frequency spectrum. Suitable for cable, RF, and data applications, the SRF 1000 is easily configured for both simple and complex networks. Signal routing can be directly controlled by applying 12 VDC thru a D-9 connector. Be careful not to apply 12VDC to more than 1 pin at a time.

Features & Benefits

Long life expectancy - tested to 1,000,000 @ 50 cycles per hour
Broad operational frequency range: DC-2300 MHz.
Bi-directional operation: 1x8 or 8x1
Also available in a 1 ru chassis: see RRS 1000

Downloads:

Specification Sheet

Specifications:

Insertion Loss

DC-550 MHz	DC-850 MHz	DC-1450 MHz	DC-1750 MHz	DC-2300 MHz
0.3 dB	0.5 dB	0.8 dB	1.1 dB	1.4 dB

Isolation:

DC-550 MHz	DC-850 MHz	DC-1450 MHz	DC-1750 MHz	DC-2300 MHz
60 dB	50 dB	40 dB	35 dB	30 dB

Return loss:

DC-550 MHz	DC-850 MHz	DC-1450 MHz	DC-1750 MHz	DC-2300 MHz
17 dB	14 dB	14 dB	12 dB	12 dB

RF Connectors:

Type "F", 75 ohm

Control:

12 VDC via D-9 (male)

Switch Life:

10,000,000 operations @ 50 cycles/hour

Mechanical:

1.093" H x 7.37" W x 2.109" D

Power Required :

+12 VDC @ 50 mA

Maximum Input Power :

1 Watt max.

Control Interface:

D-9 Male

PIN 1:	Not used	PIN 4:	Port 4 Select	PIN 7:	Port 7 Select
PIN 2:	Port 2 Select	PIN 5:	Port 5 Select	PIN 8:	Port 8 Select
PIN 3:	Port 3 Select	PIN 6:	Port 6 Select	PIN 9:	Ground

Available Configurations:

1x8 or 8x1 Module (bi-directional)

Options:

5 VDC control applied via D-9 connector. BNC connectors. (Additional charge)