RPS 2460
previous next RF Line Amplifiers Splitters and Combiners
  • General Info
  • Features & Benefits
  • Specifications
  • Photos/Video

LNB Power Supply :
RPS Series 16 Port Redundant LNB Power Supply


The RPS Series Redundant LNB Power Supply provides a centralized power source for as many as eight LNAs, LNBs, upconverters, downconverters, and line amplifiers. The unit is comprised of two separately fused power supply modules configured for nominal voltage of +24 VDC @ 2.5 amps and has been designed for international use with an input voltage of 100-240 VAC, 50/60 Hz. The power supply modules are on individual drawers to provide easy replacement of a failed module. On the rear panel, fuse holders with green LEDs indicate power status for each of the output ports.

LNB Power Supply

 

request quote

Features & Benefits

    • Centralized redundant power source for up to 16 active devices

    • Two hot-swappable (shared) PSUs on individual drawers

    • Eliminates costly downtime

    • Allows scheduled maintenance of receivers without interrupting LNB power

    • Summary alarm via contact closure to indicate PSU failure (standard)

  RPS24/6.0F RPS24/6.0Q RPS18/4.5F RPS18/4.5Q
Frequency 270-2150 MHz N/A 270-2150 MHz N/A
Insertion Loss 0.5±0.5dB N/A 0.5±0.5dB N/A
Frequency Response ±0.5 dBm N/A ±0.5 dBm N/A
Return Loss 14 dB N/A 14 dB N/A
Output Voltage + 24 VDC + 24 VDC + 18 VDC + 18 VDC
Output Current 900 mA on any single port. Total of all ports not to exceed 6.0A 900 mA on any single port. Total of all ports not to exceed 6.0A 900 mA on any single port. Total of all ports not to exceed 4.5A 900 mA on any single port. Total of all ports not to exceed 4.5A
Power Requirements 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz
Power Consumption

50W No Load   210 w Full Load

50W No Load   210 w Full Load 46W No Load   210 w Full Load 46W No Load   210 w Full Load
Input Connectors Type “F”, 75 Ω 2-Pin Quick Connect Type “F”, 75 Ω 2-Pin Quick Connect
Output Connectors Type “F”, 75 Ω 2-Pin Quick Connectt Type “F”, 75 Ω 2-Pin Quick Connect
Mechanical 2 RU (19"Wx20"Dx3.5"H) 2 RU (19"Wx20"Dx3.5"H) 2 RU (19"Wx20"Dx3.5"H) 2 RU (19"Wx20"Dx3.5"H)
Weight 17.8 lbs. Gross (Boxed), 13.8 lbs. net 17.8 lbs. Gross (Boxed), 13.8 lbs. net 17.8 lbs. Gross (Boxed), 13.8 lbs. net 17.8 lbs. Gross (Boxed), 13.8 lbs. net)

 

  • Front
  • Back

Front

LNB Power Supply

Back

Drag Mouse Over Image for zoom-in effect

Click drag-right to increase window - click drag-left to decrease. Click drag-up to zoom in. Click drag-down to zoom out

 

 

 

RPS Redundant LNB Power Supply

quintech site search button

Request Quote

 

Quick Links               

Products
RF Matrix Guide
Spec Sheets
Software Downloads
Contact Us
Distributors
Download Catalog
Tradeshows
News
RF Conversion Tables

 

Military Solutions Home Page Link