RPS Redundant LNB Power Supply


  • General Info
  • Features & Benefits
  • Specifications
  • Applications
  • Photos/Video

LNB Power Supply


LNB Power Supply :
RPS Series 16 Port Redundant LNB Power Supply

The RPS Series Redundant LNB Power Supply provides a centralized power source for as many as eight LNAs, LNBs, up converters, down converters, and line amplifiers. The unit is comprised of two separately fused power supply modules configured for nominal voltage of +24 VDC @ 2.5 amps and has been designed for international use with an input voltage of 100-240 VAC, 50/60 Hz. The power supply modules are on individual drawers to provide easy replacement of a failed module. On the rear panel, fuse holders with green LEDs indicate power status for each of the input ports. An automatic resetting circuit brealer will prevent each input port from exceeding 900 mA. Loads in excess of 900 mA will "trip" the breaker, shutting down the input until the current demand drops below the trip point.

 

request quote

Power Inserters Here

Features & Benefits

    • Centralized redundant power source for up to 16 active devices

    • Two hot-swappable (shared) PSUs on individual drawers

    • Eliminates costly downtime

    • Allows scheduled maintenance of receivers without interrupting LNB power

    • Both supplies in the RPS are monitored by a summary alarm which employs a serial RS-422 interface.





     

     

     

     


  RPS24/6.0F RPS24/6.0Q RPS18/4.5F RPS18/4.5Q
Frequency 270-2150 MHz N/A 270-2150 MHz N/A
Insertion Loss 0.5±0.5dB N/A 0.5±0.5dB N/A
Frequency Response ±0.5 dBm N/A ±0.5 dBm N/A
Return Loss 14 dB N/A 14 dB N/A
Output Voltage + 24 VDC + 24 VDC + 18 VDC + 18 VDC
Output Current 900 mA on any single port. Total of all ports not to exceed 6.0A 900 mA on any single port. Total of all ports not to exceed 6.0A 900 mA on any single port. Total of all ports not to exceed 4.5A 900 mA on any single port. Total of all ports not to exceed 4.5A
Power Requirements 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz
Power Consumption

50W No Load   210 w Full Load

 50W No Load   210 w Full Load 46W No Load   210 w Full Load 46W No Load   210 w Full Load
Input Connectors Type “F”, 75 Ω 2-Pin Quick Connect Type “F”, 75 Ω 2-Pin Quick Connect
Output Connectors Type “F”, 75 Ω 2-Pin Quick Connect Type “F”, 75 Ω 2-Pin Quick Connect
Mechanical 2 RU (19"Wx20"Dx3.5"H) 2 RU (19"Wx20"Dx3.5"H) 2 RU (19"Wx20"Dx3.5"H) 2 RU (19"Wx20"Dx3.5"H)
Weight 17.8 lbs. Gross (Boxed), 13.8 lbs. net 17.8 lbs. Gross (Boxed), 13.8 lbs. net 17.8 lbs. Gross (Boxed), 13.8 lbs. net 17.8 lbs. Gross (Boxed), 13.8 lbs. net)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Front
  • Back

Front

*Photo Shown RPS

 

Back

*Photo Shown RPS