RLS48 1750A Redundant L-band Splitter
w/ Hot Swap Amplifiers & PSUs

  • General Info
  • Features & Benefits
  • Specifications
  • Applications
  • Photos/Video

l-band splitter

Downloads

Spec Sheet RLS 48
RLS48 1750A





L-band Splitter :
RLS48 1750A Redundant L-band Splitter

Based on Quintech’s RPS series redundant power supplies and the LS2150 series L-band splitters, the RLS48 1750A provides an active 48 way redundant splitter operating over the 950-1750 MHz frequency range..

 

request quote

 

Features & Benefits

    • Hot-swappable redundant power supply modules

    • Hot-swappable redundant splitter/ amplifier modules

    • 10dB of gain in 1dB steps via front panel mounted rotary switches

    • Front panel mounted LED indicators for power supply and splitter/ amplifier status

    • Front panel mounted momentary switch for manual switching of redundant splitter/ amplifiers

    • RS-422 interface for remote switching of redundant splitter/ amplifiers

    • Dual AC power supply modules

    • Redundant back-up amplifier replaces failed amplifier in less than 1 μsec.





     

     

     

     


  RLS 1750 L-band Splitter with Hot Swap Amplifiers and Power Supplies
Ports 1 input / 48 output
Output Frequency Range 950 -1750 MHz
Impedance 50 Ω
P1dB (Input): -10 dBm
Gain (Variable): 0 dB to 10 dB in 1dB steps
Frequency Response: ± 2.5 dB over the operating frequency range
± 0.5 dB over any 40 MHz
± 0.75 over any 72 MHz
Isolation: 18 dB min.
Return Loss: 16 dB min., 18 dB typical
Noise Figure: < 14 dB @ 0 dB gain, < 11 dB @ 10 dB gain
RF Connectors: BNC, 50 Ω (female)
Power Requirements: 100-240 V~, 50/60 Hz
Power Consumption: 79 W
Redundant Amplifier Switching Speed: <1 μsec
Phase Differential: 5 degree differential
Nominal Input Level: -25 dBm
Operating Temperature Range: 0-50° C
Control: RS-422 via rear panel mounted DB 9 connector. Provides control for remote switching between splitter/amplifier modules. Also provides alarms for PSU and splitter/amplifier failures. Software customer supplied.
Mechanical: 3 RU (3.5” H x 19” W x 20” D)
Weight: 21 lbs. gross (boxed), 15 lbs. net

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Front
  • Back

Front

*Photo shown RLS 1750

 

Back

*Photo shown RLS 1750