RFS 2150/2
|
|
Customer Comments:
Welcome to Adobe GoLive 6
"I must be a happy customer as I have brought Quintech into the cruise industry several years ago -- and your RF matrices and other RF products are now standard throughout fleets from Royal Caribbean Cruise Line to Celebrity Cruises. The Royal Caribbean Cruise Line's fleet of 16 ships. All use only Quintech RF Matrix systems or Quintech RF Splitters for their satellite systems. Celebrity Cruise Line's fleet of 9 ships also uses only Quintech RF splitters or Quintech RF Matrix systems for their satellite systems."
Peter Canzonetta
MAVCO
|
|
The RFS 2150/2 L-Band RF Sensing Redundancy Switch provides two 2x1 L band sensing switches, which detect the presence of RF (primary) and provides the ability to switch to backup (secondary) on loss of primary. Each of the sensing switches utilize SPDT relays that terminate the off path with 75 ohm. The primary RF input is filtered, amplified, and detected to operate the relays. When the input level is above the preset threshold, which is adjustable using the front panel up/down pushbuttons, the relays are de-energized and the primary signal path is selected. When the signal falls below the preset threshold, the relays are energized and the secondary signal path is selected. A front panel slide switch has been included to allow manual override to the secondary input. The rear panel has been equipped with relay contact alarm outputs and a remote override via contact closure.
Note: Under a no power condition, the unit will default to the primary position.
|
|
