QE3 64 x 64 Hot Swap L-band RF Matrix Router
with 
- General Info
- Features & Benefits
- Specifications
- Applications
- Photos/Video
QE3 Hot Swap L Band Matrix Router Switch for RF
The QE3 L-band and IF Routing Switch features a compact 64 x 64 RF matrix in 6 RU with 
. The QE3 is a full fan-out, non-blocking RF L-band Matrix Switch where any input can be routed to any or all outputs. Its operating frequency range covers both IF 50-200 MHz and L-band 950-2150 MHz. The QE3 is highly scalable and can easily be expanded to a 1024 x 1024. Hot-swappable component cards enable fast and easy replacement without any special tools or disconnecting any cables. The hot swappable control cards, which operate independently & simultaneously, offer the highest level of redundancy in control. The dual hot swappable power supply provides redundancy in powering. The RF level at the inputs and outputs is monitored to facilitate trouble shooting network interfaces. The programmable automatic gain control (AGC) and attenuation on all inputs allows the user to adjust input signal level for optimum performance.
In today's complex telecommunication networks, the QE3 L-band Router offers the best in reliability and flexibility to manage multiple RF signals.
technology
Q-ROUTE – Provides Internal Signal Path Redundancy by Automatically Re-routing Around a Failed Signal Path (Example)
Q-SENSE – Provides External Signal Path Redundancy by Automatic Switching of Back-up Input Signals (Example)
In today's complex telecommunication networks, the QE3 Routing Switch offers the best in reliability and flexibility to manage multiple RF signals.
Features & Benefits
-
-
Q-ROUTE – Provides Internal Signal Path Redundancy by Automatically Re-routing Around a Failed Signal Path (Example)
Q-SENSE – Provides External Signal Path Redundancy by Automatic Switching of Back-up Input Signals (Example)
In today's complex telecommunication networks, the QE3 Routing Switch offers the best in reliability and flexibility to manage multiple RF signals.
-
Touch Screen Interface & Embedded Web Browser Software
-
Compact, modular design offers a 64x64 L Band RF router in 6RU. The RF Matrix router is easily expandable to 1024x1024
-
Redundant hot-swap control cards plus independent control systems offer the highest level of redundancy in control
-
L Band RF signal level monitoring at the inputs and outputs provides self test capability and facilitates troubleshooting network interfaces
-
Programmable AGC and attenuation on all inputs allows the user to adjust the input signal level for optimum L Band performance
- All active components can be very easily hot swapped (in less than 30 seconds) from the front without replacing any cables or using any tools
| Operating Frequency: | L-band (950-2150 MHz) |
| Configurations: | 64x64 (6RU) up to 1024x1024 with additional modules |
| Impedance: | 75 Ω (50 Ω optional) |
| Insertion Loss: | 0 ± 2dB |
| Frequency Response: | ± 3 dB |
| Isolation | |
| (input to input): | 60 dB Typical |
| (output to output): | 60 dB Typical |
| (input to output different input): | 50 dB Typical |
| Input P1dB: | 0 dBm |
| Normal Operating Input Power Level: | -50 dBm to -10 dBm |
| Noise Figure: | 16 dB Max |
| Return Loss: | >13 dB |
| RF Connectors: | 75 Ω Type "F" |
| AC Input Power: | 90 to 264VAC, 47 to 63 Hz |
| Power Consumption: | 150 W |
| Local Control: | Front panel keypad with LCD display |
| PC Remote Control: | RS-232. RS-422/485, SNMP, Telnet or TCP/IP via customer supplied PC |
| Software: | Embedded Web Browser and Command Protocol Included |
| Mechanical: | 64x64 in 6 RU (10.5" H x 19" W x 20" D) (Larger systems require multiple modules) |
