SBA HUBZone Certified Manufacturer
LS32 2150A
Customer Comments:
L-band Splitter - 32-way Active - Amplified
"Nice equipment; cost per port was good. You beat two other quotes for like-type equipment by $80 per port."
Viguen Mangasarian COMSOURCES USA, INC .
The LS32 2150A is a commercial quality 32-way splitter that meets strict level and match specifications achieved through the use of Quintech's proprietary microstrip and SMT technology. It operates over the 950-2150 MHz frequency range and permits signal splitting with zero loss, eliminating the need for external distribution amplifiers. The LS32 2150A provides LNB DC power insertion that can be switched on or off via the front panel mounted slide switch (see LNB Power specification below).
Note: All unused ports must have 75 ohm terminations.
Features & Benefits
Convenient, centralized rackmount designs improve cable management.
Microstrip design provides better performance and reliability.
Eliminates cascading, providing better performance.
Active (zero loss) splitters allows for ease in RF budget design.
Microwave coupled design provides better balanced signal levels at all outputs.
Custom configurations are available to optimize rack space and increase design flexibility.
Greatly improves cable management and aesthetics by allowing for easy access to cable routing and easing identification of cabling.
Reduces cable connector failures by eliminating the need for frequent manual connects/disconnects.
Select A Configuration
4-way Active L-band Splitter
Quad 4-way Active L-band Splitter w/ dual ext. internal redundant AC power
8-way Active L-band Splitter
12-way Active L-band Splitter
16-way Active L-band Splitter
24-way Active L-band Splitter
32-way Active L-band Splitter
48-way Active L-band Splitter
64-way Active L-band Splitter
Downloads:
Specification Sheet
Specifications:
Operating Frequency 950-2150 MHz Satellite L-band
Impedance 75 ohm
P1dB -10 dBm
Insertion Loss 0 ± 2 dB
Frequency Response ± 2 dB
Isolation 18 dB
Input Return Loss 10 dB
Output Return Loss 11 dB
Noise Figure 12 dB
RF Connectors Type "F", 75 ohm (BNC optional)
Power Requirements 18-24 VDC via 2-pin quick connect barrier strip
LNB Power 18 VDC
Power Consumption 12 W
Mechanical 2 RU (3.5"H x 19"W x 14"D)
Weight 11 lbs. gross (boxed), 6.2 lbs. net
