Quintech Electronics RF Distribution Products

SBA HUBZone
Certified Manufacturer

L Band Splitter / Combiner - Passive 16-way (1x16 or 16x1)

Home > Products > RF Splitters & Combiners > Passive L-band Splitters & Combiners > LS16 2150P

LS16 2150P
(Opens new window)
Customer Comments:

Welcome to Adobe GoLive 6

"Good people to work with. They are going in the right direction."

Charles R. Cox Jr.
PARKER DRILLING CO.

The LS16 2150P is a commercial quality 16-way L-Band splitter/combiner that meets strict level, match, and loss specifications achieved through the use of Quintech's proprietary microstrip and SMT technology. It operates over the 950-2150 MHz frequency range and enables the splitting or combining of RF signals with repeatable performance over the entire frequency range and across all I/O ports. Output port 1 is power passing for LNB power from a satellite receiver. Since DC paths are diode protected, LNB power is redundant if both paths are powered. A rear panel terminal is provided for external LNB power insertion.

Note: All unused RF ports must be terminated.

Features & Benefits

  • Convenient, centralized rackmount designs improve cable management.
  • Microstrip design provides better performance and reliability.
  • Eliminates cascading, providing better performance.
  • Active (zero loss) splitters allows for ease in RF budget design.
  • Microwave coupled design provides better balanced signal levels at all outputs.
  • Custom configurations are available to optimize rack space and increase design flexibility.
  • Greatly improves cable management and aesthetics by allowing for easy access to cable routing and easing identification of cabling.
  • Reduces cable connector failures by eliminating the need for frequent manual connects/disconnects.
Downloads:
Specification Sheet
Specifications:
Operating Frequency 950-2150 MHz Satellite L-band
Impedance 75 ohm
Maximum Operating Input Power -17 dBm
Insertion Loss 0 ± 2 dB
Frequency Response ± 2 dB
Isolation 18 dB
Input Return Loss 10 dB
Output Return Loss 10 dB
RF Connectors Type "F", 75 ohm (BNC optional)
Power Requirements 18-24 VDC, via 120 VAC 60 Hz adapter 2-pin quick connect barrier strip
LNB Power 18 VDC
Power Consumption 12 W (Excluding LNB Power Requirement)
Mechanical 1 RU (1.75"H x 19"W x 6.5"D)

HOME • ABOUT US • PRODUCTS • APPLICATIONS • NEWS & EVENTS • CONTACTS • TESTIMONIALS • SITE MAP • GET MORE INFO
© 1997-2007 Quintech Electronics and Communications Inc. All Rights Reserved.
All content on this website, including, but not limited to product specifications, is subject to change without notice.