SBA HUBZone Certified Manufacturer
LS4 2150A
(Opens new window)
Customer Comments:
Welcome to Adobe GoLive 6
"Nice equipment; cost per port was good. You beat two other quotes for like-type equipment by $80 per port."
Viguen Mangasarian COMSOURCES USA, INC .
The LS4 2150A is a commercial quality 4-way splitter that meets strict level and match specifications achieved through the use of Quintech's proprietary microstrip and SMT technology. It operates over the 950-2150 MHz frequency range and permits signal splitting with zero loss, eliminating the need for external distribution amplifiers. The LS4 2150A provides LNB DC power insertion that can be switched on or off via the front panel mounted slide switch (see LNB Power specification below).
Note: All unused RF output ports must be terminated.
Features & Benefits
Convenient, centralized rackmount designs improve cable management.
Microstrip design provides better performance and reliability.
Eliminates cascading, providing better performance.
Active (zero loss) splitters allows for ease in RF budget design.
Microwave coupled design provides better balanced signal levels at all outputs.
Custom configurations are available to optimize rack space and increase design flexibility.
Greatly improves cable management and aesthetics by allowing for easy access to cable routing and easing identification of cabling.
Reduces cable connector failures by eliminating the need for frequent manual connects/disconnects.
Select A Configuration
4-way Active L-band Splitter
Quad 4-way Active L-band Splitter w/ dual ext. internal redundant AC power
8-way Active L-band Splitter
12-way Active L-band Splitter
16-way Active L-band Splitter
24-way Active L-band Splitter
32-way Active L-band Splitter
48-way Active L-band Splitter
64-way Active L-band Splitter
Specifications:
Operating Frequency 950-2150 MHz Satellite L-band
Impedance 75 ohm
Maximum Operating Input Power -20 dBm
Insertion Loss 0 ± 2 dB
Frequency Response ±1 dB
Isolation 18 dB
Input Return Loss 11 dB
Output Return Loss 16 dB
RF Connectors Type "F", 75 ohm (BNC optional)
Power Requirements 18-24 VDC, via 120 VAC 60 Hz adapter 2-pin quick connect barrier strip
LNB Power 18 VDC
Power Consumption 10 W
Mechanical 1 RU (1.75"H x 19"W x 6.5"D)
