The QE3 2500 is a matrix switch and switching subsystem that provides a complete 64x64 matrix, including hot-swappable cards, redundant power supplies, and redundant system controllers in a 6 RU chassis. The modularity of the QE3 Matrix Switching System permits a wide variety of configurations ranging from 8x16 up to 1024x1024. The QE3 features Quintech’s latesttechnology. Q-ROUTE provides internal signal path redundancy by automatically re-routing around a failed signal path. Q-SENSE provides external signal path redundancy by automatic switching of back-up input signals. The unit provides easy access to cards for seamless upgrades and maintenance via the front panel without requiring cables to be disconnected or disrupting the signal paths of other cards in the system. Information on the QE3

The QRM 2500 is a full fan-out (splitting) matrix switch and switching subsystem that provides a complete 16x16 matrix switching solution in a 1 RU chassis. The QRM operates at both IF (50-200MHz) and L-Band (950-2150 MHz). The QRM features Quintech’s latesttechnology. Q-ROUTE provides internal signal path redundancy by automatically re-routing around a failed signal path. Q-SENSE provides external signal path redundancy by automatic switching of back-up input signals. It is controllable either locally via the front panel keypad or remotely via computer and is compatible with most monitoring and control systems. Information on the QRM

The XRM 2250 is a matrix switch and switching subsystem that provides a complete 32x32 matrix, including hot- swappable cards, redundant power supplies, and system controller in a 6 RU chassis. The unit provides easy access to cards for seamless upgrades and maintenance via the front panel without requiring cables to be disconnected or disrupting the signal paths of other cards in the system. The system is controllable either locally via the front panel keypad or remotely via computer and is compatible with most monitoring and control systems.The unique 3-stage architecture provides unparalleled reliability with the ability to re-route around signal faults detected inside the unit. The XRM matrix system is an essential and effective solution for satellite, broadcast and cable facilities where signal path integrity is critical. Information on the XRM

The SRM 2150 is a full fan-out matrix switching system that allows any of 16 inputs carrying RF signals to be routed to any or all of 16 outputs. The system utilizes patented stack-and-tier technology which offers ultra-reliable, high- performance, in a compact, modular design. This greatly reduces the size and complexity of the system while greatly enhancing the system's reliability by eliminating the need for repetitive mechanical connections. The system is controllable either locally via the front panel keypad or remotely via computer and is compatible with most monitoring and control systems. Information on the SRM

The MRM 2500 is a matrix switch and switching subsystem that allows any of 4 to 16 inputs carrying RF signals to be routed to any of 4 to 16 outputs. The system utilizes patented stack-and-tier technology which offers ultra-reliable, high- performance, in a compact, modular design. This greatly reduces the size and complexity of the system while greatly enhancing the system's reliability by eliminating the need for patch panels and repetitive mechanical connections. The system is controllable either locally via the front panel keypad or remotely via computer and is compatible with most monitoring and control systems. The rear panel design facilitates structured cable routing, thereby eliminating confusing tangles and bundles of cables. Information on the MRM

The RFS0450 is an A/B sensing switch that operates in the 20-500 MHz frequency range. When the signal level at the RF common port is below the preset threshold, the receive signal path is selected. When the signal level goes above the preset threshold, the transmit signal path is selected. Power is applied via feed-thru studs. The RFS04501SBK006 is housed in a compact aluminum enclosure.. Information on the RFS

Based on Quintech's RPS series redundant power supplies and the LS2150 series L-Band rack mount splitters, the RLS48 1750A provides an active 48 way redundant splitter operating over the 950-1750 MHz frequency range.
Features:

The PUL 140D is an ultra-stable frequency converter based on Quintech's popular fixed channel converters. It features highly improved phase noise and stability performance that exceeds the IESS 308/309 standard, and is suitable for all current high-speed data transmission rates and advanced digital modulation schemes. It is capable of translating digital 140 MHz IF signals to any customer-specified L-band channel. The channel frequency is factory preset.

The PDL 070D is an ultra-stable frequency converter that is capable of translating any L-Band channel to a digital 70 MHz IF signal. Based on Quintech’s PLL stabilized fixed channel frequency converters, the PDL features a stability performance that meets the IESS 308/309 standard, and is suitable for all current high speed data transmission rates and high order modulations. Information on the PUL/PDL

AMP2150: Designed and optimized specifically for the 700-2150 MHz frequency band, the AMP2150 line amplifier provides variable gain to optimize the signal path through long coaxial cable runs and distribution networks. The unit is powered via the output "F" connector and will pass DC for LNB power. The unit also passes a 10 MHz Reference. Like all other Quintech RF products, the AMP series amplifiers are manufactured using highly reliable surface mount technology and advanced microstrip RF circuitry. Information on the AMP2150

RSS 0070: Designed and optimized specifically for the 50-90 MHz frequency band, the RSS00708X8SA001 bi-directional redundancy switch routes a redundant backup input signal to any one output. The unit receives Quintech protocol V.2.30 data commands via RS-485 signal through data port on rear panel. Like all other Quintech RF products, the RSS series switches are manufactured using highly reliable surface mount technology and advanced microstrip RF circuitry. The 1 RU rack mount enclosure is fitted with rack slides.. Information on the RSS

The SRR 2150 is a unidirectional, programmable RF switch that provides signal routing capability for the extended satellite L-Band frequencies (950-2150 MHz). Controllable either locally via the front panel keypad or remotely through a computer interface, the SRR215016X1SS000 greatly enhances system reliability by eliminating patch panels and repetitive mechanical connections. The design of the rear panel facilitates structured cable routing, thereby eliminating confusing tangles and bundles of cables. Information on the SRR 16x1 and the SRR 1x16